DSG & S TRONIC UPGRADES
TCU DYNAMIC SOFTWARE OPTIONS
RacingLine OEM+ TCU Dynamic Software is simply an essential upgrade to get the most out of any modified VW group DSG car.
Several years of road and track development have given RacingLine the smartest transmission software on the market: by continually feeding the engine ECU’s torque demands through to the gearbox’s controller, the system dynamically calculates and adjusts the DSG’s variable clutch pressures to suit whatever your power output is.
Meaning that just one RacingLine TCU software upgrade will serve your car from standard, through Stage 1, right up to Stage 3 and beyond. Therefore, unlike some, there is no need for a new TCU calibration every time you increase or decrease your car’s performance.
WHAT DOES OEM+ TCU TUNING DO?
The RacingLine TCU Dynamic upgrades are some of the best modifications you can make to your DSG or S Tronic transmission.
RacingLine engineers reprogram the gearbox's calibration inside the TCU (Transmission Control Unit). This allows the transmission to maintain higher torque levels through RacingLine dynamic clutch pressure strategy, right up to a impressive 19 bar pressure. The outcome? Shifts are even faster, giving harder acceleration through the gears, whatever level of performance your car has - up to and beyond Stage 3.
In the meantime, the driving mode approach itself is optimised to suit higher power levels, giving a more natural gear choice profile. Shift into manual and at last you'll have true gear control at your hands - no auto-upshift, no kick down until, you command it (or drop back to D/S modes).
Additionally, launch control will get you off the mark faster through allowing more boost at launch and increased launch RPM, combined with a less restrictive traction control in launch mode.
BENEFITS OF OEM+ TCU DYNAMIC SOFTWARE
The RacingLine smart TCU software takes its feed from the ECU to calculate torque demands: meaning one flash gives dynamic clutch pressure whatever your engine tune.
Augmented clutch clamping pressure and elevated shift beyond factory torque levels ensure the quickest changes possible for the greatest performance.
PEACE OF MIND
RacingLine are uniquely positioned to tap into a vast, wide-ranging knowledge base and resources network in development. OEM+ TCU software will never overstress the intrinsic hardware systems
RacingLine dynamic TCU map is essential for any car that is desired to reach Stage 2 or above. By increasing the torque limiters in the gearbox, the 'box will no longer instruct the engine ECU to withold back power. Meaning the full potential of the engine will no longer be limited.
Theres nothing better than having the ability of taking full control of your car with RacingLine True Manual Mode. Even in normal 'D' mode, shift strategy is more natural, avoiding those annoying upshifts right through to top gear at low speeds.
The RacingLine OEM+ TCU tunes are compatible with all engine ECU software. So even if you use another brand, you can still enjoy RacingLine TCU smart software.